Skip to content

ROMPOX® – D1

2-component paver jointing mortar for medium traffic loads

Excellent for Light to Medium Traffic Loads

The Proven Professional Paving Jointing Mortar

ROMPOX® – D1 is a light to medium vehicle rated, two-component Jointing Mortar suitable for driveways, parking spaces and all vehicular loading applications up to 7.5t. ROMPOX® – D1 is a proven resin jointing solution with increased pouring capacity that is self-compacting, water emulsifiable and suitable for 3mm (1/8”) wide joints on all natural stone and concrete surfaces. Resistant to ants, weeds, frost, de-icing salt and is pressure washer safe.

Rompox-D1-1024x1024
For traffic loads up to 7.5 T
For joint widths from 1 ⁄8” | 3 mm
Self compacting
Pressure washer safe
Increased pouring capacity & water emulsifiable
Ideal for driveways & parking spaces
Frost and de-icing salt resistant
2-Comp-1024x331

FEATURES

WATCH THE ROMPOX® – D1 INSTALL VIDEO

HOW-TO-APPLY ROMPOX® – D1

rompox-draIn-plus-mix

1. Mixing

Pour the 55 lbs filler material into the mixing tub and start the mixing process. Whilst mixing, slowly add the ROMPOX® D1 components into the mixture. Use professional agitator or rotary-drum mixer / compulsory mixer.

rompox-drain-plus-add-water

2. Add Water

Rinse both bottles with 0.5 litres of water, close, shake well, add to mix and mix for 3 minutes. After mixing for 3 minutes, add 3 litres | 0.8 gal of water. Continue mixing well for another 3 minutes. Total mixing time: minimum 6 minutes.

rompox-easy-pour-on

3. Pre-Wet

Intensely pre-wet surface. Porous surfaces as well as higher surface temperatures, require more intense pre-wetting.

rompox-easy-wash-in-1

4. Application

Apply the mixed pavement jointing mortar onto the pre-wetted surface by pouring out in three or four spots to optimise flow capacity. Work carefully into the joints using a squeegee/rubber slider, ensuring it passes deep into the joints and fills them completely.

rompox-d1-wash-in

5. Sweep Off

After approx. 10 minutes the excess mortar on the surface of the stones can be swept off carefully with a large, coarse broom. The correct moment for sweeping, is when white smears no longer form on the stone surface during sweeping.

rompox-d1-final-cleaning

6. Final Cleaning

Finally, use a soft hair broom to do a final cleaning until all residual mortar has been removed from the surface. Sweeping should be done diagonally to the joint. Do not re-use swept off material.

 

LEARN MORE