Skip to content

ROMPOX® – DRAIN

2-component paver jointing mortar for light vehicle loads

For Pedestrian to Light Traffic Loads

The Permeable Paving Jointing Mortar

ROMPOX® – DRAIN is a highly-water permeable two-component jointing mortar suitable for driveways, parking spaces and all light vehicular loading applications. Classic resin jointing solution that is self-compacting, water emulsifiable and suitable for all natural stone and concrete surfaces. Resistant to ants, weeds, frost, de-icing salt and is pressure washer safe.

Rompox-Drain-1024x1024
For light traffic loads up to 3.5 T
For joint widths from 1 ⁄4” | 6 mm
Self compacting
Pressure washer safe
Highly water permeable
Ideal for driveways & parking spaces
Frost and de-icing salt resistant
2-Comp-1024x331

FEATURES

WATCH THE ROMPOX® – DRAIN INSTALL VIDEO

HOW-TO-APPLY ROMPOX® – DRAIN

rompox-draIn-plus-mix

1. Mixing

Pour the 55 lbs filler material into the mixing tub and start the mixing process. Whilst mixing, slowly add the ROMPOX® DRAIN components into the mixture. Use professional agitator or rotary-drum mixer / compulsory mixer.

 
rompox-drain-plus-add-water

2. Add Water

After mixing for 3 minutes add 2 litres | 0.53 gal of water. Fill up the two previously emptied resin/hardener bottles with 1 litres | 0.26 gal of water, close, shake vigorously and add the contents of the bottle to the mixture. Continue mixing well for at least 3 minutes.

 

rompox-drain-plus-pre-wet (1)

3. Pre-Wet

Intensely pre-wet surface. Porous surfaces as well as higher surface temperatures, require more intense pre-wetting.

 

rompox-drain-plus-wash-in (1)

4. Application

Apply the mixed pavement jointing mortar onto the pre-wetted surface by pouring out in three or four spots to optimise flow capacity. Work carefully into the joints using a squeegee/rubber slider, ensuring it passes deep into the joints and fills them completely.

 

rompox-drain-plus-sweep-off (1)

5. Sweep Off

After approx. 10 minutes the excess mortar on the surface of the stones can be swept off carefully with a large, coarse broom. The correct moment for sweeping, is when white smears no longer form on the stone surface during sweeping.

 

rompox-drain-plus-final-cleaning

6. Final Cleaning

Finally, use a soft hair broom to do a final cleaning until all residual mortar has been removed from the surface. Sweeping should be done diagonally to the joint. Do not re-use swept off material.

 

LEARN MORE ABOUT ROMPOX® – DRAIN